Name: PLA Basic Refill 10-100kg Deals
Brand: ANYCUBIC
SKU: 10P-AHPLMG-A103
Price: 96.99 USD
Availability: InStock
Rating: 5.0 (5 reviews)

$96.99

$96.99 ~~$199.90~~

$9.00/kg for bulk sale

Features

File Download

Specification

Color Type

Reviews

FAQs

$96.99

$96.99 ~~$199.90~~

Add to cart

Anycubic PLA Basic Refill Filament

Eco-friendly | Controllable Luster | Intelligent ID | Ease of Installation

Ways to Obtain Anycubic Filament Spools

1. Purchase Anycubic's reusable spools.
2. Reuse your previous spools.
3. Print your own spool from Makeronline.

Stronger Adhesion

The special surface treatment on the cool plate offers PLA filaments extremely strong adhesion at just 45°C. Effectively decreases the possibilities of warping and bottom layer separation when printing smaller parts and large-scale models.

Vibrant Colors

A vast selection of colors opens up more possibilities for creativity and your next project.

Anycubic PLA Basic Refill Filament Characteristic

Boosting Efficiency with Intelligent Identification

The filament has built-in Intelligent Filament Identification, it automatically detects official filament types, colors, and remaining volume while syncing factory-tuned print profiles directly to Anycubic Slicer Next. Zero manual tuning required.

Note: Requires an internet connection and is compatible exclusively with Anycubic printers

Filament Installation

1. Label the Filament

Remove both stickers and both chips. (if present.) Install new chip stickers onto both flanges.

2. Load the Filament

Open the spool, align the filament with the latch, and snap it into place.

3. Locking the Spool

Close the spool, press firmly, and rotate until you hear a “click," confirming it's locked.

4. Prepare the Filament

Once the spool is locked, remove the bonding strap and thread the filament into the spool hole.

Model Display

File Download

Specification

Printer Compatibility

Anycubic Full Product Lineup

Nozzle Type

All Nozzle

Recommended Nozzle Size

≥0.2 mm

Enclosed Printing Requirement

Not Required

ACE 2 Pro Multicolor Filament Box

Compatible

Dry Out Before Use

Recommended

Drying Condition

45-50 ℃, 6-8 h

Hotbed Glue Requirement

Not Required

Nozzle Temperature

190-230 ℃

Heated Bed Temperature

55-56 ℃

Recommended Printing Speed

50-200 mm/s

Cooling Time

8 s

Maximum Volume Speed (Flow Rate)

12 mm³/s

Density

1.24 g/cm³

Melt Index

4~10 g/10 min (190 ℃/2.16 kg)

Melting Point Temperature

168 ℃

Vicat Softening Temperature

55 ℃

Heat Deflection Temperature (0.45MPa)

54 ℃

Young's Modulus

2534±85 MPa

Tensile Strength

48±5 MPa

Elongation at Break

8±1%

Bending Modulus

3360±100 MPa

Bending Strength

90±3 MPa

lzod lmpact Strength (X-Y)

22±1 kJ/m²

Tensile Strength (Z)

26±1 MPa

Color Type

ColorHex CodeDisplay

Yellow#F3E500

Peach Pink#FFC196

Orange#FF7F32

Pink#FF8DA1

Magenta#CF4F80

Red#CE3845

Purple#6A6DCD

Interstellar Violet#5B618F

Cyan#23A3C7

Tropical Turquoise#009CBD

Blue#003594

Spring Leaf#89A84F

Green#009639

Beige#D4B996

Brown#927968

White#EFF0F1

Grey#B1B3B3

Texture Silver#8A8D8F

Texture Grey#75787B

Black#212721

FAQs

What are the recommended printing settings for using Anycubic PLA Basic Refill?

For optimal results, it’s recommended to pre-dry the filament at 45℃–50℃ for 6–8 hours. During printing, use a temperature range of 190℃–230℃ with a heated bed set between 55℃–65℃. A printing speed of 50–200 mm/s, and a maximum volunme speed of 12 mm³/s are advised to achieve high-quality prints while maintaining material integrity.

If I buy 3KG of filament, will I receive a single 3KG roll?

No. All our filaments are packaged in 1KG rolls. For example, if you purchase 3KG, you will receive three separate 1KG rolls rather than one 3KG roll. The same rule applies to other quantities as well.