Anycubic Kobra 3 V2

The model of the camera mounting parts is already built into the printer's memory file and needs to be printed and mounted by users.

1. Improved Leveling Accuracy for Reliable Printing.
2. Faster Startup with Zoned LevelingIt can perform leveling on a specific area determined by the bottom surface area and position of the model, reducing print preparation time.
3. Comes Standard with a 720p Camera for instant monitoring.(The model of the camera mounting parts is already built into the printer's memory file and needs to be printed and mounted by users.)
4. Expanded Print Volume for More Creativity.
5. S1-Level Nozzle Sealing to Reduce Leakage.

The Kobra 3 V2 supports PLA, PETG and TPU. The Kobra 3 V2 supports most 1KG filaments with the following specifications: outer diameter ranging from 195-200mm, spool thickness between 60-68mm, and outer wall thickness of 3-3.5mm. Also don't forget to check whether the printing temperature of the consumables is within the temperature range supported by the print head of our machine.

Yes. The ACE Pro can precisely detect Intelligent Identification Filaments, automatically optimizing printer settings for the best results. If users use filaments without Intelligent Identification, the ACE Pro will not automatically detect the material and color, and users need to switch colors manually when printing.

Yes, the machine supports both power-loss recovery and filament runout detection functions.

Yes. This machine includes a 720P camera.

The machine operates at a noise level of approximately 55dB.

The recommended printing speed is 300 mm/s, with a maximum printing speed of up to 600 mm/s and a maximum acceleration of 20,000 mm/s². The time to print a small boat (layer height 0.2 mm) is approximately 13 minutes.

The standard nozzle is 0.4 mm, and it supports a printing layer thickness range of 0.6mm to 0.8mm.