Photon Mono M7 Max

Supports 8 languages (Chinese, English, German, Russian, Spanish, French, Japanese, Italian).

Recommended ambient temperature: 8℃-40℃. If the temperature falls below this range, it is recommended to enable the resin heating function. Humidity: 20%-50%. Avoid direct sunlight or exposure to other ultraviolet light sources.

Currently, only one can be used at a time, as they share a single USB power interface. When using the air purifier, you can switch to Air Purification Mode in advanced settings to turn it off individually if needed.

Chitu and Tango can also be used (depending on their latest versions), but Lychee is currently not supported.

The Photon Mono M7 Max has a power-resume function, but it cannot guarantee a flawless print after resuming.

The Photon Mono M7 Max supports an automatic feeding function. Ensure the automatic feeding option is selected before starting the print; resin can be refilled during printing (feeding speed may be slower in low-temperature environments).
You can also manually add resin, though there may be some color variation between layers.

The Photon Mono M7 Max’s high-speed mode is ideal for most common model printing scenarios—specifically, models with 2mm hollowing and vent holes are suitable for high-speed printing. Note that due to differences in high-speed control algorithms, high-speed mode is only supported in Photon Workshop version 3.3.1 and above; other slicing software currently does not support high-speed printing.

The Photon Mono M7 Max can detect issues during printing such as complete layer separation due to insufficient bottom exposure or vibration, and model detachment caused by inadequate supports, all of which result in a sudden drop in release force to zero.